Sub rollers on the sliding table

The basic machine settings are made in the works during final assembly. Dismantling various modules, transport and assembly at the installation site can mean that it is necessary to correct the machine settings. The machine parts to be checked are described below.
Checking the lower rollers
The lower rollers must move smoothly at the start and end of the running surface over the starting angle. They should be set so that they can be stopped manually by exerting a perceptible force and slide freely while the sliding table is moved.
Adjustment of the lower rollers
The lower rollers are supported eccentrically and adjustable. If they are set too tight the sliding table is hard to move.



 

Altendorf Qinhuangdao Machinery Manufacturing Co. Ltd.      Imprint            www.altendorf.com    

                                                     

东拓互动